Repairing a Loose Pan Handle

はじめに

In this guide, you will learn how to fix a loose pan handle. This will be done by removing the handle, cleaning the handle base, and repairing any warps. A warp is when the metal bends out of shape. This does not work on cast iron, since the handle does not come off.

必要な工具と部品

手順1 Repairing a Loose Pan Handle

Repairing a Loose Pan Handle, Repairing a Loose Pan Handle: 手順 1、 3の画像 1

Repairing a Loose Pan Handle, Repairing a Loose Pan Handle: 手順 1、 3の画像 2

Repairing a Loose Pan Handle, Repairing a Loose Pan Handle: 手順 1、 3の画像 3

Identify the screw keeping the handle in place.
Most screws are located on the underside, and a typical pan has only one screw. If there are more, locate them as well.
Use a standard Phillips screwdriver to remove the screw(s).

編集

手順2

Repairing a Loose Pan Handle: 手順 2、 3の画像 3

Remove the handle and the metal bar to expose the base of the pan handle.
The base is where the full handle and the pan meet.

編集

手順3

Repairing a Loose Pan Handle: 手順 3、 3の画像 3

Determine what kind of cleaning is required. I used a Lysol solution, which can be substituted with soap and water.
If there is rust or burn marks, there are two guides on iFixit by other creators that work well. Their links can be followed by their respective words.
Apply your cleaning solution to the base.
If necessary, apply cleaning solution to the handle and metal bar, as well.
Wipe the area until it is clean, repeat if necessary.

編集

手順4

Identify the warp on the pan, if any.
Warps can impact the handle, making it loose or rest incorrectly. This can occur with even small warps, so look closely at your pan.
Set the pan on top of a flat cloth.
If the warp is going in towards the pan, lay it down with the inside of the pan facing up. If the warp is going out away from the pan, lay it down with the bottom of the pan facing up.

編集

手順5

If you do not use cloths, you will scratch the pan when you do Step 6.
Cover the warp with a second cloth. We used a different dish towel.

編集

手順6

Do not hammer too forcefully otherwise the pan will warp the opposite way.
Hammer the warp carefully.
It should take 2-3 strikes for smaller warps and more than 3 for bigger warps.

編集

手順7

Take the metal bar and place it back over the base.

編集

手順8

Repairing a Loose Pan Handle: 手順 8、 3の画像 3

Align the handle onto the metal bar.
Push the handle into the metal bar socket.
Put the screw back in the socket.
Use the screw driver to tighten the screw.
To make sure it's not too loose, pick it up by the handle to test it. If it wobbles it is too loose, and needs to be tightened more.