この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。
はじめに
Stalled printer for error 0xF2 or 0xF3
The error compare when there are some problem with encoder with roller to feed paper.
必要な工具と部品
-
-
Remove the external component
-
Remove all component
-
Remove Ink tanks
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
16 の人々がこのガイドを完成させました。
14 件のコメント
Perfect. I used this guide to disassemble my printer.
I had 0xF1 and/or 0xF4. The reason was some paper stuck between the gears of the paper feed (in this guide step 12).
I hope this hint will help others. I didn't find any info about these error code online.
Error descriptions I found here - http://www.fatalerrors.info/
muito obrigado pela ajuda