メインコンテンツにスキップ

はじめに

Stalled printer for error 0xF2 or 0xF3

This error happens when there are some problems with the encoder when the roller tries to move paper.

パーツ

パーツは指定されていません。

  1. Remove the paper tray Remove the paper cassette Remove Ink tanks
    • Remove the paper tray

    • Remove the paper cassette

    • Remove Ink tanks

  2. Remove the opening covers Remove the opening covers
    • Remove the opening covers

  3. Remove the rear component
    • Remove the rear component

  4. Dismount the Ink lever
    • Dismount the Ink lever

  5. Remove the front panel screws Remove the front panel screws
    • Remove the front panel screws

  6. Dismount LCD Panel Dismount LCD Panel
    • Dismount LCD Panel

  7. Remove the front panel Remove the front panel Remove the front panel
    • Remove the front panel

  8. Remove the back panel screws Remove the back panel screws Remove the back panel screws
    • Remove the back panel screws

  9. Remove the last back panel screw (hidden behind the LCD display) Remove the last back panel screw (hidden behind the LCD display)
    • Remove the last back panel screw (hidden behind the LCD display)

  10. Remove the back ethernet panel
    • Remove the back ethernet panel

  11. Remove the main back panel, being careful not to damage the LCD display Remove the main back panel, being careful not to damage the LCD display Remove the main back panel, being careful not to damage the LCD display
    • Remove the main back panel, being careful not to damage the LCD display

  12. Clean the left roller very gently with a dry tissue or a soft brush Clean the left roller very gently with a dry tissue or a soft brush
    • Clean the left roller very gently with a dry tissue or a soft brush

  13. Clean right encoder very gently with a dry tissue or a soft brush. Clean right encoder very gently with a dry tissue or a soft brush. Clean right encoder very gently with a dry tissue or a soft brush.
    • Clean right encoder very gently with a dry tissue or a soft brush.

  14. If you want to test the printer you need to insert paper, and cover 2 switches with tape. If you want to test the printer you need to insert paper, and cover 2 switches with tape.
    • If you want to test the printer you need to insert paper, and cover 2 switches with tape.

  15. Reassemble the printer (remove the tape first if you have used it) following these instructions in reverse.
    • Reassemble the printer (remove the tape first if you have used it) following these instructions in reverse.

終わりに

To reassemble your device, follow these instructions in reverse order.

16 の人々がこのガイドを完成させました。

delete

メンバー登録日: 2012年11月15日

541 ポイント

1ガイドが承認済み

14 件のコメント

It's works, thanks

Thom - 返信

Perfect. I used this guide to disassemble my printer.

I had 0xF1 and/or 0xF4. The reason was some paper stuck between the gears of the paper feed (in this guide step 12).

I hope this hint will help others. I didn't find any info about these error code online.

DumahBrazorf - 返信

Error descriptions I found here - http://www.fatalerrors.info/

John Smith -

Thank you very much ! This is a very useful and beautifully documented guide. Best wishes and greetings to the kind author of this guide from Bratislava, Slovakia.

George Pekarovic

George - 返信

muito obrigado pela ajuda

Filipe Rocha - 返信

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 12

過去 30 日: 82

今までの合計 56,624