Repairing Canon PowerShot Lens Error E-18

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

はじめに

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

必要な工具と部品

手順1 Repairing Canon PowerShot Lens Error E-18

Repairing Canon PowerShot Lens Error E-18, Repairing Canon PowerShot Lens Error E-18: 手順 1、 1の画像 1

Place camera lens facing upwards on the table.
Press and hold down the power button.
Simultaneously press down the shutter button.

翻訳

手順2

Replace the batteries in the camera.
To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.
Remove the old batteries from the camera and wait a few moments.
Put in a fresh set of batteries.
Close battery slide and power camera back on.

翻訳

手順3

Put blow dryer in the "no heat" setting prior to plugging it in.
Plug in and turn the blow dryer on.
Blow air in the gaps between the lens.

翻訳

終わりに

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。