はじめに

キーボードの上部右端を落としてしまった場合、電源ボタンが動かなくなり、キーボードが作動しなくなります。

これはキーボードを再び作動させるための短縮版ガイドです!

パーツ

パーツは必要ありません。

凹んでしまったアルミニウムの部分をナイフを使って切断します。少し難しい作業で、切断するにはある程度の力が必要です。が上手くいくはずです。
  • 凹んでしまったアルミニウムの部分をナイフを使って切断します。少し難しい作業で、切断するにはある程度の力が必要です。が上手くいくはずです。

  • ナイフでの作業にはくれぐれもご注意ください。指を切らないように気をつけてください。

コメントを追加する

凹み部分を切断する際に必要であれば、電源ボタンを取り出してください。
  • 凹み部分を切断する際に必要であれば、電源ボタンを取り出してください。

  • 凹みが取れて内部が平らになったら、電源ボタンを元の位置に戻します。

コメントを追加する

まとめ

ボタンに装備されているアルミニウムが取り外せたら、デバイスは修理完了です。再組み立ては必要ありません。

43 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

100%

Midori Doiさんは世界中で修理する私たちを助けてくれています! 貢献してみませんか?
翻訳を始める ›

Peter Alt

メンバー登録日: 2010年06月11日

731 ポイント

4のガイドは作成済み

This worked for me. Be Careful. I made it worse initially because the inside edge became rough with my hacking away. I ended up smoothing the edge with a stainless steel cuticle pusher. Also: Constantly blow the scrapings away so they don't get caught between the button and the edge.

joan roco - 返信

Thanks for this idea. It worked great for me and saved the keyboard. My first idea was to try to fully disassemble the keyboard so I could bend the piece back out with pliers after removing the button. I probably would've destroyed the keyboard without fixing it without this simple idea.

Wesley Womack - 返信

Bullshit nothing can go between the button and the Keyboard, i just break my keyboard... thx

ruedifly - 返信

It worked for me. Took an hour or so to carefully cut the alumunium around the button. It took quite long because I have a crappy cutter that will easily snapped its sharp point.

Eventually the click was starting to work. Didn't manage to cut deeper so the whole assembly is still stuck.

Indramin Darmadi - 返信

It worked! The dent is pressing the power button making it unmovable. Its was on that state until I changed batteries. Now scratched and dented but working. Apple design flaw.

adelacuesta2972 - 返信

It worked for me! I purchased an Apple Wireless Keyboard off eBay for 5.04 (!) that was missing the Z key. It was listed as being in excellent condition, a few scuffs, in working order. I figured, no problem, replacement keys are also sold on eBay for a few bucks.

Found out that the back tube had been bent over the (right side) power button. Saw this guide, and put in about a half hour GENTLY scraping away at it.

Keyboard works like a charm now! Thanks a bunch!!!

Joel - 返信

It works like a charm. It takes a lot of patience to remove the dent and smoothing the edge with a nail file, but it's worth it.

Carlos Teran - 返信

Worked beautifully! Bought a keyboard together with the trackpad and Thunderbolt display at Goodwill, only sign of usage on the set was a dent on the button, haha. I had to dig quite deep to get the button unstuck, but no issue at all! Even the cheapest knifes are able to cut the aluminium away.

DefinitelyNot AShark - 返信

Thanks for this! The knives didn't make it nice so I mainly used a double cut flat file, and went a bit deeper until some white plastic appeared , that I was able to pull out to original position and make the button clickable again, I'm happy.

.. Maybe Apple could solve it by make the eject key work as power button..

MadWurmz from Planet Verbs - 返信

Worked !!!, My problem was that the keyboard had a dent right at the button side corner, then the button kept always pushed and somehow the batteries didn´t last a week. 5 mins repair. Thank you so much!

smejia2001 - 返信

Awesome fix, just under a minute to fix my keyboard

Millan Garcia - 返信

Worked great for me. Was carrying around the keyboard and somehow the aluminum around the power button got banged up to the point that the power button was sticking. Used a razor blade to pry the button off and smoothed out the dent by shaving off some material with the aforementioned razor blade. Works much better now.

carlxjones - 返信

5stars! Fixed my power button in 10 min! Thank you!

James Bohrer - 返信

Great tutorial!!! Everything was ok...now I have to smooth the edges...because it seems bitten by a shark! ;-)

Renzo Spanu - 返信

I have a broken power button. The plastic that holds it in is broken. Pieces fall out.

lbmsholly - 返信

its works for me, but I didn't cut way the edge of the power. what I did was I just poke an sharp blade on the power and lift it out. it takes me only a minute to do this.

Thanks :)

rodel resurreccion - 返信

コメントを追加する

統計データを表示:

過去 24時間: 9

過去 7 日: 79

過去 30 日: 310

今までの合計 50,687