はじめに
Removing the rear access panels will provide access to the battery and o-rings. Make sure all power is disconnected before beginning this process to ensure safety.
For more information on removing the rear access panels, please refer to page 11 (section 4.4.2) in the service manual.
NOTE: Screw types and lengths are not specified in the manuals
必要な工具と部品
-
-
Remove the rear plastic cover by turning the single hex key retaining clip to free the cover.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.