はじめに

In this guide you will be removing the side case doors. This is a necessary step to replace every other component on the HP Compaq dx2000MT.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

コメントを追加する

Remove the 2 Phillips #2 screws that secure the case door to the device. Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

コメントを追加する

Remove the side case door by pushing towards the rear of the device with your hand. This may take considerable force so keep pushing! Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

コメントを追加する

Remove the side case door by pushing towards the rear of the device with your hand. Once again, this may take considerable force. Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Logan Pace

メンバー登録日: 2011年10月12日

2,020 ポイント

15のガイドは作成済み

チーム

Cal Poly, Team 17-16, Regan Fall 2011 Cal Poly, Team 17-16, Regan Fall 2011人のメンバー

CPSU-REGAN-F11S17G16

4 メンバー

17のガイドは作成済み

コメント1件

Good , trying an apps

Nur Izzatie - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 1,546