はじめに

There are 2 RAM slots in the 6930p Laptop. One is the expansion slot and accessible from the underside of the device, the other is the default location for factory installed RAM and is located under the keyboard. This guide focuses on the RAM slot under the keyboard.

Flip laptop over and locate the battery release button Push release button to the left to release battery and gently pull battery from the laptop Push release button to the left to release battery and gently pull battery from the laptop
  • Flip laptop over and locate the battery release button

  • Push release button to the left to release battery and gently pull battery from the laptop

コメントを追加する

Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard Slide the retention clips toward the keyboard to release the keyboard
  • Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop

  • Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard

  • Slide the retention clips toward the keyboard to release the keyboard

コメントを追加する

Use a plastic pry tool to lift the rear edge of the keyboard. Pull  the keyboard slightly towards the display to disengage  the tabs along the front of the keyboard from the laptop palm rest. Lift the keyboard up to reveal the ribbon connectors
  • Use a plastic pry tool to lift the rear edge of the keyboard.

  • Pull the keyboard slightly towards the display to disengage the tabs along the front of the keyboard from the laptop palm rest.

  • Lift the keyboard up to reveal the ribbon connectors

After loosening the four moveable tabs at the screen end you simply pull slightly to the right to loosen the left side and then up to loose the five tabs in the lower end, then flip keyboard over so keys face the screen.

e5frog - 返信

Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable Release the smaller ribbon cable by lifting up the white retainer I found it easier to reinstall both cables with the new keyboard resting on the back edge
  • Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable

  • Release the smaller ribbon cable by lifting up the white retainer

  • I found it easier to reinstall both cables with the new keyboard resting on the back edge

There is no need at all to loosen any ribbon cables, after flipping keyboard so it faces keys against screen you can simply remove the RAM. Don't fiddle with the ribbon cables.

e5frog - 返信

Locate RAM module Push metal tabs outwards away from the RAM module to release it.
  • Locate RAM module

  • Push metal tabs outwards away from the RAM module to release it.

  • The RAM module will spring up and can be removed from the RAM slot.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

15 の人々がこのガイドを完成させました。

Richdave

メンバー登録日: 2010年04月09日

27,525 ポイント

37のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

274 メンバー

713のガイドは作成済み

HP Elitebook 6930p. Huh !!!!

Desingn constructor is the largest manufacturer idiot. Put one memory slot inside, located under the keyboard denotes an unparalleled stupidity.

astorp2000 - 返信

I agree with above comment, weird thing to do.

S Cleaver - 返信

Thanks for your splendid guide. I don't have a plastic pry tool. A bass guitar plectrum works just as well though. The whole job took under 10 mins to complete. I now have X2, 2GB memory cards installed. This is plenty to run Manjaro JWM 16,04.1. It boots up only using 180 MB of RAM - perfect.

Andy Mitchell - 返信

Great guide. Trying to part out computer and couldn't figure out where other memory slot located. Agree dumb place for it.

Been Allison - 返信

コメントを追加する

統計データを表示:

過去 24時間: 12

過去 7 日: 53

過去 30 日: 234

今までの合計 21,062