Removing Philips DC320 37 Bottom Panel

はじめに

Welcome to the DC320 Repair Guide, your comprehensive resource for restoring power and performance to your electronic device. Whether you're a seasoned technician or a DIY enthusiast, this guide will walk you through the steps to address common issues and revitalize your DC320.

必要な工具と部品

手順1 Docking entertainment system

Removing Philips DC320 37 Bottom Panel, Docking entertainment system: 手順 1、 1の画像 1

Pry off the four white feet with the pointed end of the spudger

編集

手順2

Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

編集

手順3

Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.
The connectors on the panel are fragile and may break.

編集

手順4

Removing Philips DC320 37 Bottom Panel: 手順 4、 3の画像 3

Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.
Electrical Connectors
Ribbon Connectors
The cables do not have a lot of slack in them. Be careful not to break the connectors.
One wire is soldered onto the bottom panel. Be careful not to break this bond.