はじめに
This guide shows how to apply the rear camera adhesive in your Google Pixel 8a.
必要な工具と部品
-
-
If any rear camera conductive tape is still on the logic board, use tweezers to remove it.
-
Remove the replacement conductive tape from its plastic backing.
-
Carefully place the conductive tape so it connects the metal tab on the bottom right corner of the camera housing to the logic board.
-
Use the flat end of a spudger to firmly press the adhesive into place, securing it to the camera and logic board.
-
Remove the remaining liner.
-
-
もう少しです！
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
