はじめに
Instructions for how to disassemble the top assembly of the Razer Naga Epic mouse.
This is a relatively simple part of the device that houses the middle two buttons of the device as well as being responsible for bridging connections from the numpad to the mainboard.
必要な工具と部品
-
-
The PCB is held to the top panel by...
-
2 x 6mm Phillips #0 screws towards the front
-
2 grooves on the top panel holding it in towards the rear
-
-
-
-
Carefully slide the PCB horizontally away from the grooves on the rear end of the top panel.
-
もう少しです！
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
