修理を始めるには コミュニティ ストア

Razer Huntsman Tournament Edition Port Replacement

はじめに

If your port is either wobbly or non-functional, use this guide to replace it. This guide should take a half hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

必要な工具と部品

  1. Razer Huntsman Tournament Edition Port Replacement, Keycaps: 手順 1、 1の画像 1

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    翻訳

  2. Razer Huntsman Tournament Edition Port Replacement: 手順 2、 2の画像 1 Razer Huntsman Tournament Edition Port Replacement: 手順 2、 2の画像 2

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    翻訳

  3. Razer Huntsman Tournament Edition Port Replacement: 手順 3、 3の画像 1 Razer Huntsman Tournament Edition Port Replacement: 手順 3、 3の画像 2 Razer Huntsman Tournament Edition Port Replacement: 手順 3、 3の画像 3

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    翻訳

  4. Razer Huntsman Tournament Edition Port Replacement, Chassis: 手順 4、 1の画像 1

    • Remove all of the keycaps with a keycap puller.

    翻訳

  6. Razer Huntsman Tournament Edition Port Replacement: 手順 5、 3の画像 1 Razer Huntsman Tournament Edition Port Replacement: 手順 5、 3の画像 2 Razer Huntsman Tournament Edition Port Replacement: 手順 5、 3の画像 3

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    • Screw placement and quantity may vary per unit.

    • If you have removed all screws and the front panel cannot be removed, there may be an additional screw near the USB port, below the sticker. (See third photo)

    翻訳

  7. Razer Huntsman Tournament Edition Port Replacement: 手順 6、 1の画像 1

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    翻訳

  8. Razer Huntsman Tournament Edition Port Replacement: 手順 7、 1の画像 1

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    翻訳

  9. Razer Huntsman Tournament Edition Port Replacement: 手順 8、 1の画像 1

    • Disconnect the internal cable.

    翻訳

  10. Razer Huntsman Tournament Edition Port Replacement, Port: 手順 9、 2の画像 1 Razer Huntsman Tournament Edition Port Replacement, Port: 手順 9、 2の画像 2

    • Unscrew the board with the port.

    • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

    • Move the cable out of the way for the second screw

    翻訳

  11. Razer Huntsman Tournament Edition Port Replacement: 手順 10、 1の画像 1

    • Detach the internal cable from the USB board.

    • Do this carefully.

    翻訳

  12. Razer Huntsman Tournament Edition Port Replacement: 手順 11、 1の画像 1

    • Remove the USB board.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Joseph O'Dowd

メンバー登録日: 10/25/22

401 ポイント

3のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 UMass Dartmouth, Team 4-3, Sinclaire Fall 2022人のメンバー

UMASSD-SINCLAIRE-F22S4G3

5 メンバー

7のガイドは作成済み

1件のガイドコメント

how do i get a new port and where

Guardian Suit - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 27

今までの合計 592