メインコンテンツにスキップ

Raleigh M20 Bicycle Rear Rack Replacement

必要な工具と部品

  1. Raleigh M20 Bicycle Rear Rack Replacement, Bicycle Rear Rack: 手順 1、 2の画像 1 Raleigh M20 Bicycle Rear Rack Replacement, Bicycle Rear Rack: 手順 1、 2の画像 2
    • Make sure that the bike is upright and stable.

    • With both hands, place the rear rack on the rear wheel of the bike. Take note of where the rear rack will attach on the bike.

    • Make sure that the rear rack is fitted on the bike.

  2. Raleigh M20 Bicycle Rear Rack Replacement: 手順 2、 3の画像 1 Raleigh M20 Bicycle Rear Rack Replacement: 手順 2、 3の画像 2 Raleigh M20 Bicycle Rear Rack Replacement: 手順 2、 3の画像 3
    • Place a screw to attach the rear rack to the frame of the tire.

    • Tighten the screw with a philips screwdriver by turning it in a clockwise direction.

    • Repeat the steps above on the other side of the bike.

  3. Raleigh M20 Bicycle Rear Rack Replacement: 手順 3、 3の画像 1 Raleigh M20 Bicycle Rear Rack Replacement: 手順 3、 3の画像 2 Raleigh M20 Bicycle Rear Rack Replacement: 手順 3、 3の画像 3
    • Place the metal holder to be even with the bar sticking out of the rear rack.

    • Line up the holes. Place a bolt to attach them together.

    • Use a philips screwdriver to tighten the bolts.

    • Do this for both sides.

  4. Raleigh M20 Bicycle Rear Rack Replacement: 手順 4、 2の画像 1 Raleigh M20 Bicycle Rear Rack Replacement: 手順 4、 2の画像 2
    • Make sure that the rear rack is even. If it is not, redo the previous step.

    • Locate the screws on top of the rear rack. Tighten the screws using a philips screwdriver.

    • Once the screws are tightened, you are done.

終わりに

To detach the rear rack, follow the instructions of this guide in the reverse order.

ある他の人がこのガイドを完成しました。

作成者

6人の作成者と共同で作成されました。

Alyssa Compania

メンバー登録日: 09/26/12

86 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 7-49, Forte Fall 2012 Cal Poly, Team 7-49, Forte Fall 2012人のメンバー

CPSU-FORTE-F12S7G49

5 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 8

今までの合計 2,983