ROYALAXE R68 TKL Key Switches Replacement

はじめに

This guide will assist with the switch replacement for the ROYALAXE R68 TKL Mechanical Keyboard.

This keyboard has a Hot-swappable design. This enables super convenient pullout and pop-in of the switches. Replacing the key switches does not require significant prior knowledge; you can do this with the tools provided with this keyboard. Therefore, it is rated as "easy."

必要な工具と部品

手順1 Key Switches

ROYALAXE R68 TKL Key Switches Replacement, Key Switches: 手順 1、 2の画像 1

ROYALAXE R68 TKL Key Switches Replacement, Key Switches: 手順 1、 2の画像 2

Unplug the keyboard from its power source.

編集

手順2

Remove all keycaps with the keycap puller.
You can line up the keycaps in order or take a picture of your keyboard to make it easier to put them back on at the end.

編集

手順3

Clean the keyboard using a compressed air duster and a small brush or cotton swab.
You can also clean your keycaps by soaking them in a bowl with water and soap for about 30 minutes.

編集

手順4

Remove the switches with the switch puller.
Make sure to clamp on the switch vertically instead of horizontally. Then gently pull it out.
Taking out the switch by pulling horizontally could damage the switch.

編集

手順5

ROYALAXE R68 TKL Key Switches Replacement: 手順 5、 3の画像 3

Make sure the copper part of the switch faces you when you try to insert the switch.
Insert the key switch as straight as possible and press down gently until you hear a click.
If you fail to line it up, it will bend the copper part under the switch. This will permanently damage the switch.