RCA Pro10 Edition Speaker Replacement - iFixit 修理ガイド

はじめに

This guide will serve as a step-by-step guide for speaker replacement.

必要な工具と部品

手順1 Speaker

RCA Pro10 Edition Speaker Replacement, Speaker: 手順 1、 2の画像 1

RCA Pro10 Edition Speaker Replacement, Speaker: 手順 1、 2の画像 2

Using a separating tool, look for a seam in the plastic casing that looks most accessible.
Use the prying tool to separate the front and back casing, working your way around the perimeter.
Utilize a card tool or a pick to assist in keeping the case separated.
To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

手順2

RCA Pro10 Edition Speaker Replacement: 手順 2、 1の画像 1

Flip over the back of the device while keeping it close to the front, the speaker is attached to it.
Remove the yellow tape securing the speaker to the back casing.

手順3

RCA Pro10 Edition Speaker Replacement: 手順 3、 2の画像 1

RCA Pro10 Edition Speaker Replacement: 手順 3、 2の画像 2

Use the separating tool to pry the speaker from its surface.
Use caution when removing the speaker, you may damage the screen.
Cut or desolder the wires to replace or repair the speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Dayne Russell

メンバー登録日: 01/27/15

401 ポイント

4のガイドは作成済み

+2 個以上のバッジ

チーム

Pasco Hernando, Team 1-1, Prince Winter 2015 Pasco Hernando, Team 1-1, Prince Winter 2015人のメンバー

PHSC-PRINCE-W15S1G1

6 メンバー

10のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 3

今までの合計 749