PowerBook G3 Lombard Processor Replacement - iFixit リペアガイド

修理を始めるには

修理する権利

ストア

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

作成者： iRobot (と他の投稿者)

コメント: 0
お気に入り: 2
完了: 5

難易度

簡単

手順

15

所要時間

必要時間を提案??

ツール

これらのツールを購入する

パーツ

G3 Lombard 333 MHz Processor

非売品

表示する
G3 Lombard 400 MHz Processor

非売品

表示する

手順1

この手順は未翻訳です。翻訳を手伝う。

Turn the computer so that the ports are facing you.

Turn the computer so that the ports are facing you.
If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

手順2

この手順は未翻訳です。翻訳を手伝う。

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

手順3

この手順は未翻訳です。翻訳を手伝う。

Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
In order to replace the keyboard, you must first remove the modem.

手順4

この手順は未翻訳です。翻訳を手伝う。

Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

手順5

この手順は未翻訳です。翻訳を手伝う。

Lift the heat shield up and pull it toward you.

Lift the heat shield up and pull it toward you.

手順6

この手順は未翻訳です。翻訳を手伝う。

Your laptop should look approximately like this.

Your laptop should look approximately like this.

手順7

この手順は未翻訳です。翻訳を手伝う。

Pull the battery cable directly up from the logic board.

Pull the battery cable directly up from the logic board.

手順8

この手順は未翻訳です。翻訳を手伝う。

Remove the battery from its holder by pulling up and to the left.

Remove the battery from its holder by pulling up and to the left.

手順9

この手順は未翻訳です。翻訳を手伝う。

Remove the two silver Phillips screws from the modem.

Remove the two silver Phillips screws from the modem.

手順10

この手順は未翻訳です。翻訳を手伝う。

Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.

Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.

手順11

この手順は未翻訳です。翻訳を手伝う。

Disconnect the cable from the right side of the modem.

Disconnect the cable from the right side of the modem.

手順12

この手順は未翻訳です。翻訳を手伝う。

Your laptop should look approximately like this.

Your laptop should look approximately like this.

手順13

この手順は未翻訳です。翻訳を手伝う。

Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.

Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.

手順14

この手順は未翻訳です。翻訳を手伝う。

Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.

Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.
This step is out of sequence with the keyboard because in order to remove the keyboard you must first remove the modem.

手順15

この手順は未翻訳です。翻訳を手伝う。

Your laptop should look approximately like this.

Your laptop should look approximately like this.

ゴール

5 の人々がこのガイドを完成させました。

添付文書

G3-Lombard-Screw-Guide.pdf

PDF - 354.56 kb

表示する

作成者

1他の投稿者と一緒に

iRobot

メンバー登録日: 2009年09月24日

1 ポイント

648のガイドは作成済み

+32 個以上のバッジ

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 5,563