メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Use this guide to remove and replace the keyboard on your PowerBook 3400 M3553.

Keyboard mishaps can be frustrating, halt productivity, and decrease the usefulness of your device. Whether the keys stop working, there is external damage, or any other issue, removing the keyboard is the first step to repairing your device. Once removed, the keyboard can be cleaned or replaced depending on the extent of the damage.

Before attempting any repairs to your PowerBook, make sure that the device is turned off, disconnected to any power source, and your data is properly backed up.

パーツ

パーツは指定されていません。

  1. Close the screen and turn the PowerBook over, orienting the computer upside down, using the label to guide you.
    • Close the screen and turn the PowerBook over, orienting the computer upside down, using the label to guide you.

  2. Hold the button on the front left side and slide the battery out. Hold the button on the front left side and slide the battery out.
    • Hold the button on the front left side and slide the battery out.

  3. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  4. With a Torx T8 screwdriver, remove the three Torx 24mm screws along the center of the back panel.
    • With a Torx T8 screwdriver, remove the three Torx 24mm screws along the center of the back panel.

  5. Turn the computer over and open the display. You should see that the keyboard is loose. Before attempting to remove the keyboard, note that a ribbon cable connects  the keyboard to the logic board. Improper removal may damage your keyboard. Slightly lift the front of the keyboard up, and slide the keyboard towards yourself.
    • Turn the computer over and open the display. You should see that the keyboard is loose.

    • Before attempting to remove the keyboard, note that a ribbon cable connects the keyboard to the logic board. Improper removal may damage your keyboard.

    • Slightly lift the front of the keyboard up, and slide the keyboard towards yourself.

    • Carefully lift the top half of the keyboard and pull it towards yourself.

  6. Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port. Gently remove the ribbons from its tabs.
    • Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port.

    • Gently remove the ribbons from its tabs.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Michael Mondragon

メンバー登録日: 2011年04月12日

175 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 24-59, Amido Spring 2011 Cal Poly, Team 24-59, Amido Spring 2011人のメンバー

CPSU-AMIDO-S11S24G59

4 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 7

今までの合計 1,874