メインコンテンツにスキップ

はじめに

Vibration motors give your games emotion. Learn how to replace them with this guide.

  1. Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver. Remove the two bottom plastic grip covers. Remove the two bottom plastic grip covers.
    • Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver.

    • Remove the two bottom plastic grip covers.

  2. Remove the (2) two 9.2mm screws with a JIS #1 screwdriver. Remove the back cover of the controller.
    • Remove the (2) two 9.2mm screws with a JIS #1 screwdriver.

    • Remove the back cover of the controller.

  3. Take off the glue that is on top of the soldered joints with a sprudger. Desolder the soldered joints of the red and black wires that are connecting the vibration motors to the motherboard.
    • Take off the glue that is on top of the soldered joints with a sprudger.

    • Desolder the soldered joints of the red and black wires that are connecting the vibration motors to the motherboard.

    • Remove the vibration motors and put them aside.

    • This guide will show how to solder and desolder connections.

まとめ

To reassemble your device, follow these instructions in reverse order.

Andrea

メンバー登録日: 2017年09月26日

452 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S14-G4, Boczar Fall 2017 USF Tampa, Team S14-G4, Boczar Fall 2017人のメンバー

USFT-BOCZAR-F17S14G4

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 5

今までの合計 170