メインコンテンツにスキップ

Power Macintosh G3 Blue and White Modem Replacement

必要な工具と部品

  1. Power Macintosh G3 Blue and White Modem Replacement, Before opening up your Power Mac...: 手順 1、 1の画像 1
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

  2. Power Macintosh G3 Blue and White Modem Replacement: 手順 2、 1の画像 1
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  3. Power Macintosh G3 Blue and White Modem Replacement: 手順 3、 1の画像 1
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

  4. Power Macintosh G3 Blue and White Modem Replacement: 手順 4、 1の画像 1
    • Disconnect the modem’s flex cable from the connector on the logic board.

    • Lift the modem assembly out of it´s place on the logic board.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

[deleted]

メンバー登録日: 08/28/18

26,355 ポイント

21のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 19

今までの合計 628