メインコンテンツにスキップ

Power Mac G4 Quicksilver Hard Drive Assembly Replacement

必要な工具と部品

  1. Power Mac G4 Quicksilver Hard Drive Assembly Replacement, Hard Drive Assembly: 手順 1、 1の画像 1
    • The hard drive is located in the back right corner of the case.

  2. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: 手順 2、 1の画像 1
    • Remove the flat ribbon cable by pulling with substantial force.

  3. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: 手順 3、 1の画像 1
    • Remove the screw holding the hard drive to the computer.

  4. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: 手順 4、 1の画像 1
    • Pull the drive up and out of the computer.

  5. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: 手順 5、 1の画像 1
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

終わりに

To reassemble your device, follow these instructions in reverse order.

10 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Ryan Bylard

メンバー登録日: 01/20/10

1,325 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 14-41, Regan Winter 2010 Cal Poly, Team 14-41, Regan Winter 2010人のメンバー

CPSU-REGAN-W10S14G41

4 メンバー

17のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 12

今までの合計 7,342