このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。
必要な工具と部品
-
-
この手順は未翻訳です。 翻訳を手伝う。
-
Unfasten 3 Phillips screws revealed beneath the heat sink on the CPU board.
-
Carefully remove the CPU board from the Mother Board.
-
Remove the barrell nut screws from the Mother Board which held the CPU board.
-
Unfasten 3 Phillips #1 screws on Mother Board as shown in illustration 1.
-
Slide the logic board about a quarter of an inch to free it from the three retaining pins.
-
Pull upwards and outwards to fully remove the logic board.
-
15 の人々がこのガイドを完成させました。