メインコンテンツにスキップ

Porter-Cable PC60TAG Power Switch Replacement

必要な工具と部品

  1. Porter-Cable PC60TAG Power Switch Replacement, Power Switch: 手順 1、 1の画像 1
    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.

    • Unplug the grinder before disassembling.

  2. Porter-Cable PC60TAG Power Switch Replacement: 手順 2、 1の画像 1
    • Holding the front of the device, carefully slide the back cover over the cord.

  3. Porter-Cable PC60TAG Power Switch Replacement: 手順 3、 1の画像 1
    • Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

  4. Porter-Cable PC60TAG Power Switch Replacement: 手順 4、 1の画像 1
    • Careful remove each wire from the power cord from underneath the terminals.

  5. Porter-Cable PC60TAG Power Switch Replacement: 手順 5、 1の画像 1
    • Using the spudger, carefully push the red power switch out of the device.

  6. Porter-Cable PC60TAG Power Switch Replacement: 手順 6、 1の画像 1
    • From the other side of the device, use the spudger to carefully pry out power switch away from the device.

  7. Porter-Cable PC60TAG Power Switch Replacement: 手順 7、 1の画像 1
    • Using your fingers, carefully remove each of the gold terminals from the power switch. You may need to gently wiggle the terminal back and forth in order to remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Mackenzie Fairbanks

メンバー登録日: 03/24/16

564 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 UMass Dartmouth, Team 2-2, Isaacson Spring 2016人のメンバー

UMASSD-ISAACSON-S16S2G2

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 700