Porter-Cable 382 On/ Off Switch Replacement - iFixit 修理ガイド

必要な工具と部品

手順1 On/ Off Switch

Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 手順 1、 2の画像 1

Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 手順 1、 2の画像 2

First, locate the three screws on the top of the sander.
Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

手順2

Porter-Cable 382 On/ Off Switch Replacement: 手順 2、 2の画像 1

Porter-Cable 382 On/ Off Switch Replacement: 手順 2、 2の画像 2

Locate your on off switch and in order to remove it you must slide it out of its slot.
This shouldnt require any special tools, just wiggle the switch up and out.
Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

手順3

Porter-Cable 382 On/ Off Switch Replacement: 手順 3、 1の画像 1

Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.
Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Nick O'Sadcia

メンバー登録日: 03/11/16

421 ポイント

3のガイドは作成済み

+3 個以上のバッジ

チーム

UMass Dartmouth, Team 8-7, Botvin Spring 2016 UMass Dartmouth, Team 8-7, Botvin Spring 2016人のメンバー

UMASSD-BOTVIN-S16S8G7

3 メンバー

4のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 230