はじめに

Make sure laptop is powered off when working on the device. Be cautious not to damage the new screen as it may be delicate. The plastic frame around the screen is flimsy and may crack if it is not handled with care.

パーツ

パーツは必要ありません。

  1. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.
    • Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.

  2. Remove two 3mm screws with a Phillips #000 screwdriver. Remove two 3mm screws with a Phillips #000 screwdriver.
    • Remove two 3mm screws with a Phillips #000 screwdriver.

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  4. Wedge a blue plastic opening tool between the screen and the frame to free the screen. Do not fully remove screen as it is still attached by connector cable on bottom
    • Wedge a blue plastic opening tool between the screen and the frame to free the screen.

    • Do not fully remove screen as it is still attached by connector cable on bottom

  5. Disconnect the display cable with your fingers to fully remove the screen from the device. Disconnect the display cable with your fingers to fully remove the screen from the device.
    • Disconnect the display cable with your fingers to fully remove the screen from the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

Tanner Krygier

メンバー登録日: 2018年09月17日

857 ポイント

5のガイドは作成済み

チーム

Washington State, Team S2-G7, Hope Fall 2018 Washington State, Team S2-G7, Hope Fall 2018人のメンバー

WSU-HOPE-F18S2G7

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 49