メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

If you need to replace the lens this is guide will allow you to do so. You may need to replace the lens if it becomes scratched or cracked. For this replacement guide you will need to use the Shutter Switch replacement guide steps 1-4 as a precursor guide.

パーツ

パーツは指定されていません。

  1. Unscrew the four Phillips #0 5 mm screws on the base of the camera. Remove the two pieces of the base. Remove the two pieces of the base.
    • Unscrew the four Phillips #0 5 mm screws on the base of the camera.

    • Remove the two pieces of the base.

  2. Remove the four Phillips #0 5mm screws on the top of the inside base piece. Remove the Phillips #0 5mm two screws on the bottom of the inside base piece nearer the strap. Remove the Phillips #0 5mm two screws on the bottom of the inside base piece nearer the strap.
    • Remove the four Phillips #0 5mm screws on the top of the inside base piece.

    • Remove the Phillips #0 5mm two screws on the bottom of the inside base piece nearer the strap.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Remove the black inside base piece.
    • Remove the black inside base piece.

  5. With force separate the white front piece from the back of the camera. You will use your hands and pull it apart. With force separate the white front piece from the back of the camera. You will use your hands and pull it apart.
    • With force separate the white front piece from the back of the camera. You will use your hands and pull it apart.

  6. Remove the two Phillips #0 3mm screws on the black ring holding the lens in place and remove the ring. Remove the two Phillips #0 3mm screws on the black ring holding the lens in place and remove the ring. Remove the two Phillips #0 3mm screws on the black ring holding the lens in place and remove the ring.
    • Remove the two Phillips #0 3mm screws on the black ring holding the lens in place and remove the ring.

  7. Remove the clear plastic lens with tweezers. Remove the clear plastic lens with tweezers.
    • Remove the clear plastic lens with tweezers.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Abby Boucher

メンバー登録日: 2018年09月10日

727 ポイント

5のガイドは作成済み

チーム

University of Alabama, Team S1-G1, Bedsole Fall 2018 University of Alabama, Team S1-G1, Bedsole Fall 2018人のメンバー

UA-BEDSOLE-F18S1G1

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 14

過去 30 日: 168

今までの合計 3,014