はじめに

This guide takes you through the process of installing the left button board. This board controls the directional pad (D-pad) and PS button.

  1. Power off and remove the memory card.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    コメントを追加する

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    コメントを追加する

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    コメントを追加する

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    コメントを追加する

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    コメントを追加する

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    コメントを追加する

    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - 返信

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - 返信

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - 返信

    • Separate the front and rear cases.

    コメントを追加する

    • Pry up the left shoulder button casing with a spudger.

    • Remove the left shoulder button casing.

    コメントを追加する

    • Remove the translucent, plastic left shoulder button cover.

    コメントを追加する

    • Release the left shoulder button flex cable socket by using a spudger to pry open the tab.

      • Be careful to not break off this small black tab!

    • Using tweezers, slide the flex cable out of the socket. Do not pull on the black tab! Instead, pull the thin flex cable away from the connector (to the left in this image).

    コメントを追加する

    • Using a spudger, gently peel up the left shoulder button from the light adhesive connecting it to casing.

    This step is unneccesary.

    Alexander Mayatsky - 返信

    • Using a spudger, lift and release the tab on the ZIF socket sitting on the SIM card reader.

    • Carefully pull the flex cable out of the ZIF socket, and rest it out of the way.

    コメントを追加する

    • Use a spudger to release the tab between the SIM card reader and the back casing assembly.

    • Lift the SIM card reader off the back casing assembly.

    This board is not present in the Wifi only version, only the 3G/Wifi version.

    dodo - 返信

    • Release the plastic tab on the small flex cable socket by prying it up with a spudger.

    • Using tweezers, gently remove the small flex cable from the socket, and rest it out of the way.

    コメントを追加する

    • Use a spudger to lift up the tab on the large ZIF socket.

    • Gently pull the flex cable out of the ZIF socket, and rest it out of the way.

    コメントを追加する

    • Disconnect the white Wi-Fi antenna cable with a spudger.

    • Remove the Wi-Fi antenna cable.

    This connector isn't present in the Wifi only version, just the 3G/Wifi version.

    dodo - 返信

    • Using a Phillips #00 screwdriver, remove the six screws on the two metal brackets:

      • Two 5.0mm, blue screws on the L-bracket securing the upper left button board to the motherboard.

      • Four 5.0mm, blue screws on the square bracket securing the lower left button board to the motherboard.

    What is the loose looking cable in this photo?

    Dallon Verhaeghe - 返信

    • Starting from the upper left corner, use a spudger to pry up and remove the left button board.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Brittany McCrigler

メンバー登録日: 2012年03月05日

79,861 ポイント

133のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

114 メンバー

6,959のガイドは作成済み

good idea but i need help with the big fat one on the left because it went into water by an accsident and its not moving and its like locked or like jammed. I put it in the boiler for a while and i took it out after then it still was jammed locked.

Morganstutte@hotmail.com - 返信

please can you tell me how to fix the big fat button on the left because water went in it and i tryed putting it in the boiler for a while then i took it out and the button was still not working it like jammed locked it dosn't work. PLEEEEEEAAAAASSSSEEE HEEELLLPPP MEEEEEE!!!!!!!!!!!!!!!!!!

Morganstutte@hotmail.com - 返信

Make a video of it please!!!!

Morganstutte@hotmail.com - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 10

過去 30 日: 66

今までの合計 4,885