はじめに

This guide takes you through the process of installing the GPS antenna cable. This is the middle antenna cable on the wireless card.

Power off and remove the memory card. Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.
  • Power off and remove the memory card.

  • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

コメントを追加する

Using your fingernail or a spudger, pry open the accessory port cover on the top of the device. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.
  • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

  • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

コメントを追加する

Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port. Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.
  • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

コメントを追加する

Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases. Continue working your way around the device gently prying it open. There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.
  • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

  • Continue working your way around the device gently prying it open.

  • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together. Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.
  • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

コメントを追加する

Using a spudger, free the touch screen controller flex cable by gently prying up the connection.
  • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

コメントを追加する

Free the battery cable by gently prying up on the connection with a spudger.
  • Free the battery cable by gently prying up on the connection with a spudger.

Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

Jimbo Jones - 返信

This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

ylimakiminna - 返信

Yea I messed up there too. Is there a way to fix it?

Alethia Henry - 返信

Separate the front and rear cases.
  • Separate the front and rear cases.

コメントを追加する

Using the pointy end of the spudger, gently pry the GPS antenna cable off the wireless card.
  • Using the pointy end of the spudger, gently pry the GPS antenna cable off the wireless card.

コメントを追加する

Using the pointy end of a spudger, gently pry the GPS antenna cable off of the motherboard. Deroute the GPS antenna cable out of the casing and remove it.
  • Using the pointy end of a spudger, gently pry the GPS antenna cable off of the motherboard.

  • Deroute the GPS antenna cable out of the casing and remove it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

メンバー登録日: 2012年03月05日

78,373 ポイント

431のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

114 メンバー

5,913のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 14

今までの合計 3,590