はじめに

This guide takes you through installing a camera on the PlayStation Vita.

  1. Power off and remove the memory card.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    コメントを追加する

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    コメントを追加する

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    コメントを追加する

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    コメントを追加する

  3. 20ドル以上のお買い上げで送料無料(米国内にお住まいの方対象)
    お支払い手続きの際にはクーポンコードBLUEANDBLACKを入力してください。(米国内にお住まいの方対象)
    20ドル以上のお買い上げで送料無料(米国内にお住まいの方対象)
    クーポンコードBLUEANDBLACKをご使用ください。(米国内にお住まいの方対象)
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    コメントを追加する

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    コメントを追加する

    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - 返信

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - 返信

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - 返信

    • Separate the front and rear cases.

    コメントを追加する

    • Release the camera flex cable socket by prying up on the tab with a spudger. Leave the socket open.

    コメントを追加する

    • Using a spudger, gently pry up the camera.

    • Work your way under the camera and along the camera flex cable, using the pointy tip of the spudger to peel away the adhesive, freeing the camera.

    • Carefully lift and remove the camera.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Brittany McCrigler

メンバー登録日: 2012年03月05日

79,918 ポイント

133のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

114 メンバー

7,042のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 53

今までの合計 4,816