はじめに

This will guide you through the replacement of your controller port.

パーツ

パーツは必要ありません。

Remove the parallel port cover on the back of the PlayStation.
  • Remove the parallel port cover on the back of the PlayStation.

The SCPH-9001 model does not have the Parallel Port panel to remove.

Aislinn - 返信

Flip over the PlayStation and remove the six screws from the bottom.
  • Flip over the PlayStation and remove the six screws from the bottom.

コメントを追加する

  • Turn the PlayStation upright. Remove the cover by lifting it up.

コメントを追加する

  • Remove the two screws securing the controller port to the case.

コメントを追加する

  • Gently disconnect the ribbon cable from the logic board. This is done by pulling on the blue area of the cable near the connector.

コメントを追加する

  • Remove and replace the controller port.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

JakeDeschamps

メンバー登録日: 2009年10月28日

1,013 ポイント

10のガイドは作成済み

チーム

Cal Poly, Team 5-2, Regan Fall 2009 Cal Poly, Team 5-2, Regan Fall 2009人のメンバー

CPSU-REGAN-F09S5G2

5 メンバー

10のガイドは作成済み

I try replacing the controller and still wouldn't play memory cards.

redevil19 - 返信

I changed the controller port but the psx still doesn't recognize any controller. Both controller port and ribbon cable work perfect in other console. I wonder which components on the mother board are related with the controller ports so I can check them with a tester.

Daniel Prieto - 返信

I replaced the PS605 fuse and now the controllers work again! Thanks to this video https://www.youtube.com/watch?v=HdULot5F...

Daniel Prieto -

コメントを追加する

統計データを表示:

過去 24時間: 6

過去 7 日: 22

過去 30 日: 114

今までの合計 18,056