メインコンテンツにスキップ

PlayStation 3 Slim Top Cover Replacement

必要な工具と部品

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: 手順 1、 1の画像 1
    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

  2. PlayStation 3 Slim Top Cover Replacement: 手順 2、 2の画像 1 PlayStation 3 Slim Top Cover Replacement: 手順 2、 2の画像 2
    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

  3. PlayStation 3 Slim Top Cover Replacement: 手順 3、 1の画像 1
    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

  4. PlayStation 3 Slim Top Cover Replacement: 手順 4、 1の画像 1
    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

  5. PlayStation 3 Slim Top Cover Replacement: 手順 5、 2の画像 1 PlayStation 3 Slim Top Cover Replacement: 手順 5、 2の画像 2
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

終わりに

To reassemble your device, follow these instructions in reverse order.

92 の人々がこのガイドを完成させました。

作成者

8人の作成者と共同で作成されました。

Andrew Bookholt

586,109 ポイント

619のガイドは作成済み

2 件のコメント

No good mine a Sony.

james register - 返信

Thank you this helped me so much!!!!

Megan Davis - 返信

コメントを追加

統計データ:

過去 24時間: 14

過去 7 日: 74

過去 30 日: 305

今までの合計 73,224