メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

ビデオの概要

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.
    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.
    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

  5. In this case we have ... 4x disks. :) .
    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

  6. Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.
    • Test the console before assembling. And don't forget to put the spindle disc magnet.

終わりに

To reassemble your device, follow these instructions in reverse order.

15 の人々がこのガイドを完成させました。

ZFix

メンバー登録日: 2013年12月09日

175,479 ポイント

315のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

294 メンバー

957のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 8

過去 7 日: 84

過去 30 日: 392

今までの合計 16,772