修理を始めるには コミュニティ ストア

PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

はじめに

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

必要な工具と部品

ビデオの概要

  1. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 手順 1、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 手順 1、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement, Laser Unit (Laser and Mechanism): 手順 1、 3の画像 3

    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    編集

  2. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 2、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 2、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 2、 3の画像 3

    • To remove the power supply, first disconnect the two cables, then the 2 Phillips screws. Then lift it upwards.

    編集

  3. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 3、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 3、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 3、 3の画像 3

    • Separate cables, unscrew the screw and remove the Blu Ray drive.

    • Depending on the model of your PS3 Slim, the number of cables to be removed may vary between 2 and 4. If your model has more than one ribbon cable, remove the drive very carefully, as a fourth ribbon cable may be hidden underneath.

    編集

  5. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 4、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 4、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 4、 3の画像 3

    • Disassemble the upper metal shield by first unscrewing the 3 Phillips screws.

    • On the 2-cables model, you'll need to unscrew an additional 2 small Phillips screws, located on the underside of the drive. While you're at it, unscrew the 2 other Phillips screws at the bottom of the shield. (Their presence does not prevent removal of the upper metal shield, but removing them will be useful later).

    編集

  6. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 5、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 5、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 5、 3の画像 3

    • For the 2-cables model, remove the two very small phillips screws in each lower corner referenced by the red circles.

    • For the 4-cables model, remove the small Phillips screw in the bottom left corner referenced by the red circle.

    編集

  7. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 6、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 6、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 6、 3の画像 3

    • Carefully remove the plastic shell, paying attention to the cable that runs through it for the 4-cables model.

    編集

  8. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 7、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 7、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 7、 3の画像 3

    • Remove the 4 Phillips screws at each corner of the laser mechanism.

    • Then remove the mechanism.

    編集

  9. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 8、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 8、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 8、 3の画像 3

    • If necessary, transfer parts and screws from the old mechanism to the new one.

    編集

  10. PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 9、 3の画像 1 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 9、 3の画像 2 PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement: 手順 9、 3の画像 3

    • You can test the console before full assembling.

    • To do this, reassemble the blu-ray drive, reconnect its cables, and reconnect the power supply.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

16 の人々がこのガイドを完成させました。

作成者

8人の作成者と共同で作成されました。

ZFix

メンバー登録日: 12/09/13

191,182 ポイント

330のガイドは作成済み

バッジ: 35

+32 個以上のバッジ

チーム

Master Techs Master Techs人のメンバー

Community

322 メンバー

2,521のガイドは作成済み

コメント 1 件

Do you know what the part number is for the deck? I don’t want to buy the wrong one. Thanks.

Edmond Charrette - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 46

過去 30 日: 271

今までの合計 28,692