メインコンテンツにスキップ

PlayStation 2 Top Cover Replacement

必要な工具と部品

  1. PlayStation 2 Top Cover Replacement, Top Cover: 手順 1、 3の画像 1 PlayStation 2 Top Cover Replacement, Top Cover: 手順 1、 3の画像 2 PlayStation 2 Top Cover Replacement, Top Cover: 手順 1、 3の画像 3
    • Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.

    • Use the flat edge of a metal spudger to pry the eight flat screw covers out.

    • Remove the following eight screws securing the top cover to the bottom case:

    • Four 55.4 mm Philips screws

    • Four 18.0 mm Phillips screws

  2. PlayStation 2 Top Cover Replacement: 手順 2、 1の画像 1
    • Some models have a different number of screws and feet. Remove all the feet and screws in the bottom of the case.

    • The 10 screw model has 6 screws in the bottom-most portion and 4 in the upper tray.

  3. PlayStation 2 Top Cover Replacement: 手順 3、 1の画像 1
    • Peel the warranty sticker (located next to the main power switch) straight away from the case.

    • To avoid activating the VOID that may come up, heat it carefully to remove and replace it clean

  4. PlayStation 2 Top Cover Replacement: 手順 4、 2の画像 1 PlayStation 2 Top Cover Replacement: 手順 4、 2の画像 2
    • Flip the PlayStation 2 back to its original upside position.

    • Lift the top cover off the bottom case.

    • To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.

    • Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the top case.

終わりに

To reassemble your device, follow these instructions in reverse order.

31 の人々がこのガイドを完成させました。

作成者

12人の作成者と共同で作成されました。

jwyoung

メンバー登録日: 11/04/09

2,809 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 19-1, Maness Fall 2009 Cal Poly, Team 19-1, Maness Fall 2009人のメンバー

CPSU-MANESS-F09S19G1

4 メンバー

34のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 32

過去 30 日: 156

今までの合計 18,307