修理を始めるには

修理する権利

ストア

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

PlayStation 2 Slimline SCPH-7500x Fan Replacement

作成者： Jared Hirata (そして 13 人のその他投稿者)
  • コメント: 1
  • お気に入り: 5
  • 完了: 2

難易度

普通

手順

10

所要時間

15分

セクション

2

フラグ

4

In Progress

進行中

このガイドは現在作成中です。最新の変更を見るために定期的に再読み込みしてください。

Confusing Text

テキストが不明瞭

このガイドのテキストの数カ所が混乱し、重複しトピックから外れています。編集してより明確にしてください！

Markup Mishap

間違いの指摘

このガイドは最適な校正が必要です。校正の注釈を付けたり訂正することにご協力ください。

Needs More Images

多くの画像が必要

幾つかの画像があればこのガイドの手順がより明確になるでしょう。

はじめに

This guide will walk you through step-by-step on how to properly remove and install the fan in the PlayStation 2 Slimline.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

    • Turn off the PlayStation 2 (or PS2) and carefully unplug from the power source. Check to see there are no discs inside the console before flipping the game system upside-down.

    翻訳

  2. Locate the six feet on the bottom of the PS2.

    • Locate the six feet on the bottom of the PS2.

    • Five of the feet are in plain sight and one of the feet is located under the black void sticker on the bottom of the device.

    • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or even the screw should be in plain sight.

    翻訳

  3. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers. Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers.

    • Pry apart the five visible feet from the bottom of the device using a spudger, or your fingers.

    翻訳

  4. The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath. The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    • The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    翻訳

  5. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

  6. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2. After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

    • After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

    翻訳

  7. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves. Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    • Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    翻訳

  8. If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    翻訳

  9. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring. Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring.

    • Locate the fan component of the motherboard of the PS2. With your fingers or tweezers, peel off the sticker that holds down the fan's wiring.

    翻訳

  10. With tweezers, detach the terminal to the cord from the motherboard to the fan. With tweezers, detach the terminal to the cord from the motherboard to the fan.

    • With tweezers, detach the terminal to the cord from the motherboard to the fan.

    翻訳

  11. Locate and unscrew the three 1.6mm screws located next to the base of the fan. Locate and unscrew the three 1.6mm screws located next to the base of the fan.

    • Locate and unscrew the three 1.6mm screws located next to the base of the fan.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

13他の投稿者と一緒に

Jared Hirata

メンバー登録日: 2013年04月09日

595 ポイント

7のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

チーム

Cal Poly, Team 17-4, Regan Spring 2013 Cal Poly, Team 17-4, Regan Spring 2013人のメンバー

CPSU-REGAN-S13S17G4

3 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 10

過去 30 日: 25

今までの合計 2,369