はじめに

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

Ensure the headset is in the base's cradle.
  • Ensure the headset is in the base's cradle.

コメントを追加する

Press the volume control buttons on the back of the base until the front of the base flashes red.
  • Press the volume control buttons on the back of the base until the front of the base flashes red.

コメントを追加する

Press the mute switch on top of the headset until the green light on the headset turns on.
  • Press the mute switch on top of the headset until the green light on the headset turns on.

コメントを追加する

Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.
  • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

コメントを追加する

When the flashing red light becomes solid, synchronization is complete.
  • When the flashing red light becomes solid, synchronization is complete.

コメントを追加する

ゴール

2 の人々がこのガイドを完成させました。

Joe

メンバー登録日: 2012年04月12日

79 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 17-29, Amido Spring 2012 Cal Poly, Team 17-29, Amido Spring 2012人のメンバー

CPSU-AMIDO-S12S17G29

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 1,633