はじめに

This guide will show you the steps to remove the folding hinges at the bast of the headband.

パーツ

パーツは必要ありません。

Remove the two screws on the underside of the headband with the PH0 Phillips screw driver. Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.
  • Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.

コメントを追加する

With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband. With force, pull upwards.
  • With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband.

  • With force, pull upwards.

コメントを追加する

Remove the rail-piece that is now sticking up by pulling it up and out of the headphone. Repeat on the opposite side and the headband will be released. During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.
  • Remove the rail-piece that is now sticking up by pulling it up and out of the headphone.

  • Repeat on the opposite side and the headband will be released.

  • During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.

コメントを追加する

While holding the base of the headband with one hand, hold the ear cup with the other hand. Pull them apart to reveal the screw.
  • While holding the base of the headband with one hand, hold the ear cup with the other hand.

  • Pull them apart to reveal the screw.

コメントを追加する

While apart, remove the screw from the headphone. While apart, remove the screw from the headphone.
  • While apart, remove the screw from the headphone.

コメントを追加する

Loosen the plastic cover piece that protects the chrome folding hinge. Remove the plastic cover piece.
  • Loosen the plastic cover piece that protects the chrome folding hinge.

  • Remove the plastic cover piece.

  • During reassembly, make sure the plastic covering piece hooks onto the base of the chrome hinge before screwing it back in.

コメントを追加する

Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge. Repeat for the opposite side if necessary.
  • Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge.

  • Repeat for the opposite side if necessary.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Garrett Leung

メンバー登録日: 2013年04月16日

871 ポイント

8のガイドは作成済み

チーム

Cal Poly, Team 10-40, Amido Spring 2013 Cal Poly, Team 10-40, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S10G40

4 メンバー

15のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 6

今までの合計 245