修理を始めるには コミュニティ ストア

Pioneer Elite PRO-RO6U Optical Drive Replacement

はじめに

Water damage or a faulty electrical component on the optical drive may prevent the Pioneer Elite Pro-R06U from properly displaying an image on the television. Replacement may be necessary to get the receiver back in working order.

必要な工具と部品

  1. Pioneer Elite PRO-RO6U Optical Drive Replacement, Optical Drive: 手順 1、 1の画像 1

    • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

    編集

  2. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 2、 1の画像 1

    • Remove the two 6.5 mm Phillips screws on the back of the device casing.

    編集

  3. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 3、 1の画像 1

    • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

    編集

  4. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 4、 1の画像 1

    • Remove the optical drive cooling fan by gripping the ribbon connector at M11 and gently remove by pulling away from the slot.

    編集

  6. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 5、 1の画像 1

    • Flip the latch on the ribbon connector upward to allow for cable removal.

    • Grip the ribbon cable and remove by gently pulling away from the unlatched connector.

    編集

  7. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 6、 1の画像 1

    • Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.

    編集

  8. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 7、 1の画像 1

    • Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.

    編集

  9. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 8、 1の画像 1

    • Unplug ribbon cables D4 and D5. To unplug D4, flip the gate up and pull the ribbon away.

    編集

  10. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 9、 1の画像 1

    • Remove four 1/4th inch Phillips screws on the back of the casing.

    • Unscrew and remove the nut from the threaded connector.

    編集

  11. Pioneer Elite PRO-RO6U Optical Drive Replacement: 手順 10、 1の画像 1

    • The optical drive is still connected by a cable on its bottom side, lift the drive upwards only slightly when first removing from the casing.

    • Pull the optical drive toward the interior of the device and then lift upwards, then pull to remove the cord on the bottom left corner before removing the drive completely.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Cody Carter

メンバー登録日: 01/30/18

1,049 ポイント

6のガイドは作成済み

バッジ: 5

+2 個以上のバッジ

チーム

Baylor, Team S1-G5, Johnson Spring 2018 Baylor, Team S1-G5, Johnson Spring 2018人のメンバー

BU-JOHNSON-S18S1G5

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 286