メインコンテンツにスキップ

Philips Sonicare DiamondClean Metal Brush Connector Replacement

必要な工具と部品

  1. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: 手順 1、 2の画像 1 Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: 手順 1、 2の画像 2
    • Pull the head from toothbrush.

  2. Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 2、 2の画像 1 Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 2、 2の画像 2
    • Use a nylon spudger to pry the chrome cap at the bottom off.

  3. Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 3、 1の画像 1
    • Use a nylon spudger to release the black tabs on either side of internals.

  4. Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 4、 2の画像 1 Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 4、 2の画像 2
    • Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.

  5. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Metal Brush Connector Replacement: 手順 5、 1の画像 1
    • Use a Phillips screwdriver to remove the screw at the base of the metal head.

  6. Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 6、 1の画像 1
    • Use fine tip tweezers to push the white plastic tabs in to release the head from the innards.

  7. Philips Sonicare DiamondClean Metal Brush Connector Replacement: 手順 7、 1の画像 1
    • Gently pull the metal head from the innards.

終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Zachary Bertrand

メンバー登録日: 11/20/17

821 ポイント

3のガイドは作成済み

チーム

IUPUI, Team S22-G1, Bayer Fall 2017 IUPUI, Team S22-G1, Bayer Fall 2017人のメンバー

IUPUI-BAYER-F17S22G1

4 メンバー

9のガイドは作成済み

7 件のコメント

Great guide - but where is a good source for replacement parts?

Christian Zischek - 返信

Ordered replacement part, came within 3 days at ebay. Didn’t have to replace the soft rubber inlet parts, only the connector.

Piece of cake, exchange of battery seems more labourous, but the brush still works for two weeks, so we postpone this job.

Emilio - 返信

Gut beschrieben, aber wo bekomme ich eine neue Antriebsachse?

Beste Grüße - pechi606

Walter P - 返信

Z.B. direkt aus China : ebay

VauWeh -

Great post, thank-you. One question: My toothbrush has a wire loop around the head. The loop is soldered to the circuit board. Do you know what that wire is for? Cheers!

tim belina - 返信

コメントを追加

統計データ:

過去 24時間: 12

過去 7 日: 85

過去 30 日: 343

今までの合計 16,474