はじめに

If the epilator is plugged in and the on/ off button does not seem to be working, the switch may be in the wrong position. This guide will help you replace the switch and make sure it is in its right position for the epilator to turn on.

パーツ

パーツは必要ありません。

  1. Remove the head by pushing it to  the right.
    • Remove the head by pushing it to the right.

  2. Use a metal spudger to pry open the casing.
    • Use a metal spudger to pry open the casing.

    • Caution: The epilator's internal components could be damaged if you shove the spudger in too far.

    • Pull the plastic casing apart with your hands.

    • The plastic tab connecting the cover is likely going to break when you pull the device apart. This will not affect the operation of the epilator.

    • Remove the green board and the black socket.

    • Slide the switch down toward the socket.

    • Put the components back into the frame

    • If the switch won't line up with the plastic square, make sure the large switch on the front of the operator is in the "off" position.

まとめ

To reassemble your device, follow these instructions in reverse order.

Riannon Varney

メンバー登録日: 2018年10月08日

147 ポイント

1ガイドが承認済み

チーム

Marist, Team S1-G1, Chaterdon Fall 2018 Marist, Team S1-G1, Chaterdon Fall 2018人のメンバー

MARS-CHATERDON-F18S1G1

3 メンバー

4のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 29

今までの合計 60