メインコンテンツにスキップ

Philips Norelco Shaver 2100 Battery Replacement

必要な工具と部品

  1. Philips Norelco Shaver 2100 Battery Replacement, Casing: 手順 1、 1の画像 1
    • Remove the single screw on the back casing using a T8 Torx screwdriver.

  2. Philips Norelco Shaver 2100 Battery Replacement: 手順 2、 2の画像 1 Philips Norelco Shaver 2100 Battery Replacement: 手順 2、 2の画像 2
    • Turn the shaver so that it is facing you.

    • Press the button on the shaver head to open it.

  3. Philips Norelco Shaver 2100 Battery Replacement: 手順 3、 1の画像 1
    • Remove the two 10.1 mm screws inside the shaver head using a T8 Torx screwdriver.

  4. Philips Norelco Shaver 2100 Battery Replacement: 手順 4、 2の画像 1 Philips Norelco Shaver 2100 Battery Replacement: 手順 4、 2の画像 2
    • Lift the shaver head off of the casing.

  5. Philips Norelco Shaver 2100 Battery Replacement: 手順 5、 3の画像 1 Philips Norelco Shaver 2100 Battery Replacement: 手順 5、 3の画像 2 Philips Norelco Shaver 2100 Battery Replacement: 手順 5、 3の画像 3
    • Gently pull the black and blue casing apart using a metal spudger.

  6. Philips Norelco Shaver 2100 Battery Replacement: 手順 6、 3の画像 1 Philips Norelco Shaver 2100 Battery Replacement: 手順 6、 3の画像 2 Philips Norelco Shaver 2100 Battery Replacement: 手順 6、 3の画像 3
    • Pry the remaining casing open using a metal spudger.

    • Be careful using a metal spudger, as it may result in damaging the case.

  7. Philips Norelco Shaver 2100 Battery Replacement, Battery: 手順 7、 3の画像 1 Philips Norelco Shaver 2100 Battery Replacement, Battery: 手順 7、 3の画像 2 Philips Norelco Shaver 2100 Battery Replacement, Battery: 手順 7、 3の画像 3
    • Remove the clear case that holds the circuit board by lifting the latches on the sides and then pulling gently.

  8. Philips Norelco Shaver 2100 Battery Replacement: 手順 8、 1の画像 1
    • Located directly behind the circuit board, remove the battery from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

11 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Marshall MacClellan

メンバー登録日: 10/02/17

347 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team S1-G4, Thompson Fall 2017 USF Tampa, Team S1-G4, Thompson Fall 2017人のメンバー

USFT-THOMPSON-F17S1G4

3 メンバー

5のガイドは作成済み

14 件のコメント

To remove the battery you have to actually desolder both ends from the chip.

AGUSTIN CABRA - 返信

What are the dimensions/specs of the battery?

Haley Pearse - 返信

regular AA rechargeable batteries will not work and can be a fire hazard.

steven - 返信

The tricky part is taking the case appart. You have to gently pry on tabs to get it appart. You may break some pieces which probably won’t be a problem. May make it no longer waterproof. The battery is custom but is close to a 14450 Lion battery, do searches on ebay and aliexpress you will find them. Good luck.

Don - 返信

I have a similar Norelco razor and replaced the battery. I can’t believe the stupid company didn’t mark the battery polarity on the board!

I think this is the first time I have ever seen a company not mark polarity.

Laz - 返信

コメントを追加

統計データ:

過去 24時間: 6

過去 7 日: 39

過去 30 日: 156

今までの合計 20,846