修理を始めるには コミュニティ ストア

Philips Norelco OneBlade Servo Motor Replacement

必要な工具と部品

  1. Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 1 Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 2 Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: 手順 1、 3の画像 3

    • Ensure razor is off and razor blade has been removed.

    翻訳

  2. Philips Norelco OneBlade Servo Motor Replacement: 手順 2、 2の画像 1 Philips Norelco OneBlade Servo Motor Replacement: 手順 2、 2の画像 2

    • Locate crease in bottom third of razor.

    • Hold razor in both hands, and place thumbs near crease.

    • Slightly bend the razor near crease.

    • Pull casing apart.

    • Device may turn on upon removal. Turn off razor before continuing.

    翻訳

  4. Philips Norelco OneBlade Servo Motor Replacement: 手順 3、 3の画像 1 Philips Norelco OneBlade Servo Motor Replacement: 手順 3、 3の画像 2 Philips Norelco OneBlade Servo Motor Replacement: 手順 3、 3の画像 3

    • Locate wires below motor on either side of circuit board.

    • Remove solder from each joint using solder removal kit.

    • Do not attempt to remove wires by force.

    翻訳

  5. Philips Norelco OneBlade Servo Motor Replacement: 手順 4、 1の画像 1

    • Remove new motor from package and place in position.

    • Motor should sit above circuit board with connection prongs facing downward. Additionally, center extrusion on bottom of motor should sit in provided hole.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

Please dispose of servo motor properly. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com

5 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Joshua Etchberger

メンバー登録日: 11/07/17

472 ポイント

3のガイドは作成済み

バッジ: 10

+7 個以上のバッジ

チーム

IUPUI, Team S3-G3, Harley Fall 2017 IUPUI, Team S3-G3, Harley Fall 2017人のメンバー

IUPUI-HARLEY-F17S3G3

3 メンバー

3のガイドは作成済み

10 件のコメント

does removing the motor exposing the battery? In my unit I see some green thing underneath the motor, looks like a AA battery, can you confirm?

or is it from somewhere else? (I need to replace my battery)

Yarden Cohen - 返信

I just dismantled my shaver, and it has a 1.2v AA size NiMH battery (suppo hsy aa1200).

João Paulo Gomes -

I’m also curious about the battery. Any one have pictures of it or know what kind of battery it has inside?

James Almeida - 返信

I just dismantled my shaver, and it has a 1.2v AA size NiMH battery (suppo hsy aa1200)

João Paulo Gomes -

Thanks! This definitely helps.

James Almeida -

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 24

過去 30 日: 94

今までの合計 19,074