Pandigital Super Nova Front Facing Camera Replacement

はじめに

This guide demonstrates in detail how to remove and replace a Pandigital Super Nova front facing camera in order to preserve the function of the camera. See the battery replacement guide for instructions for taking off the back cover.

必要な工具と部品

手順1 Battery

Pandigital Super Nova Front Facing Camera Replacement, Battery: 手順 1、 1の画像 1

Remove the screw covers from each corner of the back side of the device.
Set aside.

編集

手順2

Using a Philips screwdriver, remove all four .15 mm screws from each corner.
Set aside.

編集

手順3

Using the plastic opening tool, remove the back cover of the device.

編集

手順4

Remove the three .11 mm screws that hold the battery in place.
Set aside.

編集

手順5

Unplug the battery and remove from device.
Avoid touching the motherboard as it is fragile.

編集

手順6 Front Facing Camera

Pandigital Super Nova Front Facing Camera Replacement, Front Facing Camera: 手順 6、 2の画像 1

Pandigital Super Nova Front Facing Camera Replacement, Front Facing Camera: 手順 6、 2の画像 2

Use a metal pry tool to separate the camera and the small clip that holds it in place.
Do NOT touch the MotherBoard with your bare hands. There is risk of short circuiting the device. Use nitrile gloves to prevent this.