メインコンテンツにスキップ

Panasonic Toughbook CF-29 Speaker Replacement

必要な工具と部品

  1. Panasonic Toughbook CF-29 Speaker Replacement, Battery: 手順 1、 1の画像 1
    • Locate the bay door for the battery on the left side of the laptop.

  2. Panasonic Toughbook CF-29 Speaker Replacement: 手順 2、 2の画像 1 Panasonic Toughbook CF-29 Speaker Replacement: 手順 2、 2の画像 2
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. Panasonic Toughbook CF-29 Speaker Replacement, Back Cover: 手順 3、 1の画像 1
    • Begin by turning the laptop upside down with the handle towards you.

    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  4. Panasonic Toughbook CF-29 Speaker Replacement: 手順 4、 1の画像 1
    • Remove the panel and set it aside.

    • Use a Phillips size 0 screwdriver to remove these 8 small screws.

  5. Panasonic Toughbook CF-29 Speaker Replacement: 手順 5、 1の画像 1
    • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

  6. Panasonic Toughbook CF-29 Speaker Replacement: 手順 6、 2の画像 1 Panasonic Toughbook CF-29 Speaker Replacement: 手順 6、 2の画像 2
    • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

  7. Panasonic Toughbook CF-29 Speaker Replacement: 手順 7、 1の画像 1
    • Be careful when lifting the cover as you may damage some connections.

    • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

  8. Panasonic Toughbook CF-29 Speaker Replacement: 手順 8、 1の画像 1
    • Now the back cover should be off and you can access the inside of the casing.

  9. Panasonic Toughbook CF-29 Speaker Replacement, Speaker: 手順 9、 1の画像 1
    • Place the back cover infront of you so you can access the inside of it.

    • Remove the 3 screws holding in the speaker.

  10. Panasonic Toughbook CF-29 Speaker Replacement: 手順 10、 1の画像 1
    • Pry out the speaker using a flat screw driver or a blue pry tool. It is held in with an adhesive.

  11. Panasonic Toughbook CF-29 Speaker Replacement: 手順 11、 1の画像 1
    • Your speaker is now removed

    • Put in your replacement by following the reverse steps.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Rohun Heesen

メンバー登録日: 04/13/10

426 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 27-93, Amido Spring 2010 Cal Poly, Team 27-93, Amido Spring 2010人のメンバー

CPSU-AMIDO-S10S27G93

4 メンバー

26のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 5,347