修理を始めるには コミュニティ ストア

Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement

はじめに

If your digitizer cable has failed in your Panasonic Lumix DMC-FX9 camera, follow this guide to replace. By following this guide you should be able to continue using your camera.

A digitizer cable is important to the camera as it sends the display signals to the camera screen from the motherboard. It is vital for both camera operation and a live view of the lens.

Be sure to remove the batteries from your camera prior to beginning this guide.

必要な工具と部品

  1. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement, Loose Digitizer Cable: 手順 1、 1の画像 1

    • Power off your device by locating the on/off switch on top of camera.

    編集

  2. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 2、 3の画像 1 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 2、 3の画像 2 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 2、 3の画像 3

    • Remove the screw located on the right side of the camera.

    • Remove the screw located on the bottom right of the camera, and remove the cover from the camera.

    編集

  3. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 3、 1の画像 1

    • Remove the screw located on the base of the camera.

    編集

  5. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 4、 1の画像 1

    • Pry the top part of the camera slowly. Be careful not to tear the digitilizer cable.

    編集

  6. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 5、 2の画像 1 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 5、 2の画像 2

    • Open the bigger clamp using a spudger or other tools. Repeat for the smaller clamp.

    編集

  7. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 6、 2の画像 1 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 6、 2の画像 2

    • Carefully take the thin ribbon and insert cable end into the latch. Do this for both sides.

    編集

  8. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 7、 3の画像 1 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 7、 3の画像 2 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: 手順 7、 3の画像 3

    • Once the ribbon is placed into the latch, carefully close the clamps by lowering the clamp into a down position. Repeat this step for both sides.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Kim Dung Nguyen

メンバー登録日: 02/08/18

185 ポイント

2のガイドは作成済み

バッジ: 5

+2 個以上のバッジ

チーム

University of North Texas, Team S6-G1, Thomas Spring 2018 University of North Texas, Team S6-G1, Thomas Spring 2018人のメンバー

UNT-THOMAS-S18S6G1

4 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 17

今までの合計 320