-
-
Push the memory card in and let go.
-
The memory card will pop out slightly.
-
Pull out the memory card.
-
-
-
Unscrew the small screws on the sides of the camera.
-
The screws on the left side(#00P, 4.7mm) are longer than the screw on the right side(#00P, 3.3mm).
-
-
-
-
-
Using the spudger, pry off the top cover by gliding the spudger along the entire edge between the top cover and the front cover.
-
Be careful not to damage the cylindrical capacitor on the circuit board under the top cover.
このガイドを埋め込む
サイズを選択し、以下のコードをコピーして、このガイドを小さなウィジェットとしてサイト/フォーラムに埋め込みます。
プレビュー