Panasonic KX-TG6641 Base Display Screen Replacement

はじめに

Use this guide in order to correctly replace the display screen on the charging base of the device. Display screens may become cracked or dysfunctional due to normal wear or accidents. By replacing the display, users will be able to operate features such as caller ID more easily.

必要な工具と部品

手順1 Base Display Screen

Panasonic KX-TG6641 Base Display Screen Replacement, Base Display Screen: 手順 1、 1の画像 1

Use a Phillips #0 screwdriver to remove five screws from the back cover.

編集

手順2

To remove the back cover, use an iFixit opening tool and wedge the tool in between the loosened back charging case and the front plate.
Wiggle to loosen, be careful to not pry too hard as it could cause damage.

編集

手順3

To access the display screen, use a Phillips #0 screwdriver to remove the screw on the bottom right corner of the electrical panel.
Unclip the wires hooked into the base.
It's not necessary to desolder the wires.

編集

手順4

Disconnect the two phone cable connectors.
Use a Phillips #0 to remove the screw that is fixed in the plastic holder for the connectors.

編集

手順5

Move the electrical panel to the side.
Use a Phillips #0 to remove the four screws from the brown board and lift it to access the display screen.
Be aware, there is a screw under the control panel, it is indicated with the central red circle.