メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

パーツ

パーツは指定されていません。

  1. Set the switch on the battery door to "open," and open the door. Set the switch on the battery door to "open," and open the door.
    • Set the switch on the battery door to "open," and open the door.

  2. At the left hand side, locate the head of the metal bar that holds the spring in place.
    • At the left hand side, locate the head of the metal bar that holds the spring in place.

  3. Push the metal bar down using the metal tweezers.
    • Push the metal bar down using the metal tweezers.

  4. Pull the metal bar that holds the spring in place out.
    • Pull the metal bar that holds the spring in place out.

    • You can also use tweezers for this step, although we found it easier to just use our fingers.

  5. Remove the battery access door from the device.
    • Remove the battery access door from the device.

    • In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

Zhentao

メンバー登録日: 2018年01月30日

247 ポイント

2のガイドは作成済み

チーム

Baylor, Team S2-G3, Johnson Spring 2018 Baylor, Team S2-G3, Johnson Spring 2018人のメンバー

BU-JOHNSON-S18S2G3

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 69