メインコンテンツにスキップ

Palm m105 Motherboard Replacement

必要な工具と部品

  1. Palm m105 Motherboard Replacement, Motherboard: 手順 1、 1の画像 1
    • Start with your intact Palm m105.

  2. Palm m105 Motherboard Replacement: 手順 2、 1の画像 1
    • Remove protective flap by pulling directly out from the top.

    • The two clips will pop out

  3. Palm m105 Motherboard Replacement: 手順 3、 1の画像 1
    • Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.

    • The Faceplate will then easily lift off

  4. Palm m105 Motherboard Replacement: 手順 4、 2の画像 1 Palm m105 Motherboard Replacement: 手順 4、 2の画像 2
    • Using a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise.

    • The link to purchase this screwdriver is Located here.

  5. Palm m105 Motherboard Replacement: 手順 5、 1の画像 1
    • This is what the device looks like once you have taken the screws out and opened the device.

  6. Palm m105 Motherboard Replacement: 手順 6、 1の画像 1
    • The Motherboard and screen will pop out of the back case easily.

    • Be careful when doing this step, the components are fragile.

  7. Palm m105 Motherboard Replacement: 手順 7、 1の画像 1
    • To remove the screen from the motherboard there are going to be three tabs that need to pulled up.

    • ** This step needs to be done with special care because it is very fragile.**

    • Once they are all three popped up the motherboard and screen will separate easily.

  8. Palm m105 Motherboard Replacement: 手順 8、 1の画像 1
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Aaron

メンバー登録日: 10/04/11

7 ポイント

1ガイドが承認済み

チーム

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011人のメンバー

UWSTOUT-ZHOU-F11S1G3

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 1,051