メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Palm Treo 700P Antenna Replacement

必要な工具と部品

  1. Palm Treo 700P Antenna Replacement, Battery: 手順 1、 3の画像 1 Palm Treo 700P Antenna Replacement, Battery: 手順 1、 3の画像 2 Palm Treo 700P Antenna Replacement, Battery: 手順 1、 3の画像 3
    • Press the button located just above the Sprint™ logo and then slide the cover down.

  2. Palm Treo 700P Antenna Replacement: 手順 2、 2の画像 1 Palm Treo 700P Antenna Replacement: 手順 2、 2の画像 2
    • Use the small notch on the left hand side of the phone to remove the battery.

  3. Palm Treo 700P Antenna Replacement, Antenna: 手順 3、 1の画像 1
    • Remove the stylus from the phone.

  4. Palm Treo 700P Antenna Replacement: 手順 4、 1の画像 1
    • After removing the battery and stylus, unscrew the 5 Torx screws using a T-5 Torx screw driver.

  5. Palm Treo 700P Antenna Replacement: 手順 5、 1の画像 1
    • Using the spudger, remove the small rubberized patch under the antenna.

  6. Palm Treo 700P Antenna Replacement: 手順 6、 1の画像 1
    • Unscrew the last two screws using the same T-5 Torx screw driver.

  7. Palm Treo 700P Antenna Replacement: 手順 7、 1の画像 1
    • Using the plastic opening tool, carefully pry open the back case to loosen the antenna.

  8. Palm Treo 700P Antenna Replacement: 手順 8、 1の画像 1
    • The antenna will now be loose, gently pull the antenna out of the phone.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

9人の作成者と共同で作成されました。

John Rainier Solanzo

メンバー登録日: 04/17/12

7 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 12-37, Regan Spring 2012 Cal Poly, Team 12-37, Regan Spring 2012人のメンバー

CPSU-REGAN-S12S12G37

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 759