メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Palm Treo 650 Case Replacement

必要な工具と部品

  1. Palm Treo 650 Case Replacement, Battery and Stylus: 手順 1、 1の画像 1
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 Case Replacement: 手順 2、 1の画像 1
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 Case Replacement: 手順 3、 2の画像 1 Palm Treo 650 Case Replacement: 手順 3、 2の画像 2
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 Case Replacement, Case: 手順 4、 1の画像 1
    • Remove the small round rubber cover on the back of the phone located immediately below the antenna.

    • This will uncover a screw that will be removed in the next step.

  5. Palm Treo 650 Case Replacement: 手順 5、 3の画像 1 Palm Treo 650 Case Replacement: 手順 5、 3の画像 2 Palm Treo 650 Case Replacement: 手順 5、 3の画像 3
    • Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.

    • Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.

    • Pull out the antenna.

  6. Palm Treo 650 Case Replacement: 手順 6、 2の画像 1 Palm Treo 650 Case Replacement: 手順 6、 2の画像 2
    • Pry the back cover off using a spudger or similar tool.

    • The back cover is attached by several small clips on the inside.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

14人の作成者と共同で作成されました。

mmedrano

メンバー登録日: 11/15/09

95 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009人のメンバー

CPSU-MANESS-F09S19G3

4 メンバー

18のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 3,071